Insignia NS-42P650A11 Clicking Noise [Causes & Solution]

This article will examine the causes of Insignia NS-42P650A11 Clicking Noise and provide solutions to restore your television to normal operation. This Insignia NS-42P650A11 is a popular plasma TV. It provides a great picture at a low cost. There is a common complaint among users, a clicking noise that usually causes the user to worry about the television’s performance and how long it will last. This guide will help you identify how you can repair your Insignia NS-42P650A11 clicking noise without the help of a professional.

Insignia NS-42P650A11 Clicking Noise [Causes & Solution]

If your Insignia NS-42P650A11 TV is making a clicking sound, it’s probably because of the following common problems. Here’s why and how to go about fixing them.

Causes For Insignia NS-42P650A11 Clicking Noise

• The clicking noise in Insignia NS-42P650A11 is usually the power supply board or bad caps.
• As time goes on the capacitors deteriorate or even burn out and can’t constantly supply power to the television. This causes the clicking noise of the power trying to cycle but not turning on. Maybe it’s just a mainboard failure because if it is, the TV won’t turn on at all.

Solutions For Insignia NS-42P650A11 Clicking Noise

• First, check the power supply board for visibly damaged or bulged capacitors.
• But when you find bad capacitors, usually replacing them fixes the problem.
• If the damage is serious, replace the power board with a new one.
• If the power board is fine, the mainboard may need to be tested and changed.

Insignia N8-42P650A11 Multiple Clicks, Will Not Power On

If your Insignia N8-42P650A11 Multiple Clicks, Will Not Power On. This issue is often related to problems within the power supply or motherboard.

• It’s usually the clicking noises that mean the parts in the TV are trying to engage but can’t keep the stream of power going so they keep cycling but never quite turning on.
• This is often due to bad capacitors on the power board. These capacitors become damaged and do not allow the proper amount of power to pass through to operate.
• The other possibility is a problem with the mainboard or the internal circuits being shorted out, either way, the TV will not turn on.
• For a basic troubleshooting attempt, you can try unplugging the TV, waiting for about 10–15 minutes, and then plugging it back in, as this resets some of the internal components.
• If not next thing to check is the power supply board to see if anything is physically wrong with it. if you are electronically inclined, you can change these bad capacitors yourself, if not, professional repair. Sometimes it is also a firmware problem, updating or resetting the firmware if available can solve your problem.

Insignia 42″ Plasma Clicking

If you’re hearing a clicking sound from your Insignia 42″ plasma TV, it’s often a sign of a power-related issue. Here are the possible reasons and troubleshooting steps:

Power Supply Issue

That clicking noise is often a sign of a failing power supply or bad capacitors on the power board. Plasma TVs have this problem with their capacitors that don’t allow for the right amount of power to run through them.

Solution

Open the back of the TV (only if you’re comfortable and experienced with electronics). Look out for bulged/cracked capacitors, that are swollen or leaking. Replacing these capacitors may resolve the issue.

Relay Clicking

There is a relay switch in the television’s power supply, and it may continue to attempt to turn the set on, thus producing a repetitive clicking noise. That always happens when there’s some kind of internal failure that keeps the TV from turning on.

Solution

Unplug the TV for 10 minutes and then plug it. If not then you will have to change the power supply board.

Overheating

Occasionally clicking is due to some overheated part in the television.

Solution

Make sure the TV has some ventilation around it and that it’s not in a boxed-in area.

Insignia NS-50P650A11 Clicks

Causes For the Clicking Sound In Insignia NS-50P650A11

The clicking sound in the Insignia NS-50P650A11 television appears to be due to many different things. One common cause is a faulty power supply board. One thing that could be wrong if it goes bad is the power supply board because the Insignia NS-42P650A11 Won’t Turn On But Just Clicks. The other reason could be a bad capacitor, which, if so, would not be supplying the TV with the right amount of power to work correctly.

How to Troubleshoot the Clicking Sound Issue In Insignia NS-50P650A11?

Ensure the power cord is firmly in the television and the wall outlet. And see if it is the outlet, try another one. If you are electronically inclined you can unscrew the back of the TV and look at the power supply board to see if anything is burnt out or if any capacitors are bulging. Just remove the power cable from the Television allow it to cool down for a couple of minutes then return the power cable to its socket. who knows! It just might do the trick.

Insignia Plasma TV Is Blinking And Making A Clicking Noise

If an insignia plasma TV starts blinking and clicking then it’s always some type of mechanical problem with the set. This could stem from:

• A failing power board where capacitors have blown.
• An issue with the main board.
• A faulty relay attempting to power the TV.

Solution

Turn off the TV wait for 5 or 10 minutes and then try it again. If the blinking and clicking continue, test/change the p/s. Consulting a technician is recommended if you’re unsure about handling electronics.

Insignia Fire TV Running Through External Speakers Makes Popping Sound When Turned Off

If your Insignia Fire TV makes a popping noise through external speakers when it is off, then that’s usually either a power issue or some residual signal still reaching the speakers after the TV has shut down. That has something to do with the audio signal not disconnecting, or not disconnecting at the same time as the television turns off (particularly with HDMI or optical connections).

To fix this first make sure all connections are seated. Maybe if you mute the TV before you turn it off, it won’t pop as much. Or change the audio output on your TV from “auto” to “PCM” (pulse code modulation) because it’s more likely to hold a steady connection to your external speakers. Consider checking for any available firmware updates for your Insignia TV, as these can occasionally address audio signal issues.

Insignia 42″ Plasma NS-42P650A11 Review

The Insignia 42″ Plasma NS-42P650A11 is a cheap plasma TV, but it performs pretty well for the money. It has a reputation for great colors and dark blacks, so it attracts viewers who are interested in picture quality, especially when watching movies and TV shows in dark environments. It is only 720p and cannot match the new 4K TVs but it is good enough for regular HD content.

Design and Build Quality

The NS-42P650A11 is a simply designed TV with a thin bezel that allows it to blend into many different types of rooms. It is only 2 and 1/4 inches thick, relatively thin for a plasma TV so it is very wall mountable. But it doesn’t have the elegant look of the newer ones.

Picture Quality

• Viewing Angles: A notable strength of plasma TVs is wide viewing angles, and this model maintains image quality from a variety of positions, making it great for shared spaces.
• Motion Handling: Quick response times mean no blurring of images while watching sports or action movies.

Audio Quality

It has decent-sounding speakers built-in for casual viewing but lacks bass. Hooking a soundbar or external speakers will make the sound better.

Features and Connectivity

• HDMI Ports: This includes a limited amount, that could cramp the style of anyone who has a lot of different machines.
• Other Connections: Has components, composite, and even USB outlets, so it takes care of the basics but doesn’t have anything to support newer devices.
• Smart Features: As an older model, it lacks built-in smart TV features, so streaming requires an external device.

Conclusion

In conclusion, if you are searching for why Insignia NS-42P650A11 Clicking Noise. In the Insignia NS-42P650A11, one of the most common problems is a clicking noise, and this is often due to power supply issues, most likely bad capacitors. Testing the mainboard may be necessary if the power board is not the cause. But if you follow these steps, you can usually fix the clicking sound and your TV is back in business, all without paying some expert to do it for you.

Top FAQ’s